tutorials

I had everything I needed so I didn’t spend a dime. If you don’t have an embarrassing stash a few things lying around, like I do, I think you can buy what you need for less than $15.00.

First gather your supplies,

You will need pillow forms to cover. You can buy inserts fairly inexpensively at the fabric store, especially when you catch them on sale, or like I said above, you can just recover pillows you already have. One of the pillows I’m covering today came from Walmart. I was there to buy a pillow form, but noticed that I could buy an 18 inch pillow cheaper than a 16 inch pillow insert, so I went with that.

I am using a rotary cutter, but you can make your cuts with scissors. If you plan to do much sewing, I recommend getting one and a self healing cutting mat. You will also need something to measure your fabric for cutting. I have a clear ruler and my cutting mat has markings, but a tape measure or yard stick would be sufficient.

You will also need a few pins, something to mark with is helpful ( I use a water soluble fabric marking pen), an iron and of course a sewing machine.

For the first pillow, I used a fabric called osnaburg, it looks very much like linen but is much cheaper. You can find it at JoAnn or Walmart for around $3/yd. I pre-wash my fabric before sewing to get any shrinking out of the way.

Measure the pillow or form you want to cover. Cut one piece for the front of the cover the exact dimensions. My pillow is 16″ square so I cut one piece of fabric that size. Normally when you sew, you cut the item larger, taking your seam size into consideration. For pillows I cut the fabric the same size so that the insert will fit snugly into the cover. Otherwise you end up with a saggy baggy pillow.

I want to recreate this Pottery Barn pillow, cause I think it’s really cute, but I don’t have $29 (plus shipping) to spend on a pillow- especially since I really like the set ($29 plus shipping times three- YIKES!)

To make the LOVE pillow, I took my 16″ front piece and found the center by folding it in half then in half again. I made the little pocket by cutting a pieces of the same fabric 6″ x 8″. I machine embroidered the word LOVE in the center, but you could just as easily paint the words on using regular craft paint- if you have a nice steady hand- which I do not. You could stencil it on using regular stencils or the freezeer paper stencil method or use iron on transfer paper and iron it onto your pocket. Once you have your word on your pocket, turn under all four sides 1/2″ and press.

I bet I just lost half of you

didn’t I? When I said press? Pressing gets such a bad wrap, no one

wants to fool with ironing. It takes too much time. I don’t like to

iron any more than the next guy. In fact, I think that may be what

turned me off to sewing when I was young. My granny tried to teach me

to sew and once she got all preachy about pressing after every step and

showing me the propper way to press an item, I started hearing Charlie

Brown’s teacher “wa wa waaa waaaa….” If I have to do all that, I’m

not messing with it! Well, fast forward to today, and I’m probably a

bigger preacher on the merits of pressing as you sew than my granny

every thought of being. It really doesn’t take much time, and it not

only makes the sewing easier, it makes what you sew look so, so, much

better. Have you ever seen a handmade item and just it just screamed

“homemade!” I bet it was because it wasn’t pressed. So please, please,

if you are going to take the time to make something, take just a tiny

bit more time to press. OK, off my soapbox and back to the tut.

Find the center of the pocket and place it on the center of the pillow front. To keep this extra secure for stitching I used a little bit of stitch witchery (fusible web) under the sides and bottom. Once it’s nice and secure, I used a quilting stitch on my machine and red thread to give it a hand stitched look ( not necessary, you could use a regular straight stitch, just increase the stitch length). You could also hand stitch it if you like.

On one short side of each back piece, turn under about a 3/4″ hem, press, and turn it under again. Yes, again with the pressing. Sorry.

Sew a straight stitch close to the edge of the fold on each back piece.

Now lay your front piece right side facing up on your work surface. Lay each back piece on top with right sides facing down, lining up the outer edges of the back pieces with the outer egdes of the front pieces. You will be overlapping the back pieces. This creates your envelop back.

Pin in several places to hold everything in place for sewing. Be sure to pin the edges of the back pieces so they stay put while you sew everything together.

Now sew around all four sides, I used a 3/8″ inch allowance because it looked like enough for the fabric I was using.

Clip your threads, turn your cover right side out, stuff your pillow in and admire your work. Take a picture of your lovely new pillow so you can share it with all your friends!

I also made the JOY pillow (didn’t get to PEACE yet, maybe today) and this gift box pillow like one Ballard has for- are you ready for this? $75.00!!!. I used the same construction method, you just embelish the front piece any way you like first.

Want to know how I made the Ballard’s pillow? OK I’ll tell you. It was really easy and didn’t take very long at all.

You will need a printed fabric, burlap, ribbon or double fold bias tape, freezer paper and steam-a-seam lite.

Cut your first piece to fit your pillow. Mine was 18″ this time. I happened to have a piece of green fabric almost exactly like the print on the Ballard’s pillow.

Next, cut a piece of steam-a-seam 9″ x 9″ and fuse it to the back of a piece of burlap. Do (this before cutting the burlap to size, that way you have less fraying) Cut the burlap 9″ x 9″, remove the paper backing and fuse to the center of the printed fabric.

Go around all four sides of the burlap with a zig-zag stitch in dark brown or black thread.

With the stitch witchery, (or any fusible tape- or you could use a glue stick) secure a piece of red ribbon or bias tape down the center of the burlap box, turning under the raw edges.

To make the gift tag, cut a piece of freezer paper 8.5″ x 11″ (the size of printer paper) and iron the shiny side to a piece of light weight cotton fabric. Cut the fabric 8.5 x 11 after adhering the freezer paper. Now you should have a piece of fabric that will run through your printer. I had to fiddle with mine a bit, but it worked nicely. I am not guaranteeing this will work in your printer. I simply googled free printable sheet music, found and image I liked and printed it on the freezer paper backed fabric. After printing the image onto the fabric, remove the freezer paper. Next fuse a piece of steam-a-seam to the back and cut it out in the shape of a gift tag. Remove the paper backing and iron it in place on the burlap box. Stitch around the edges with a zig-zag stitch. (sorry for the blurry photos)

Construct the pillow following the instructions above, then tie a bow from your ribbon and attach it to the front. I used fabric glue, but you could hand stitch it in place.

Stand back and admire your pillow and brag to your husband that you saved $75.00!

A little bonus tip~If you are limited on space where ever your sewing area is, you can make a little portable pressing board instead of putting up a big ironing board. I made one yesterday with a scrap of wood, it wasn’t plywood, just some sort of paneling stuff Mitch had that measured 16″ x 24″. I covered it with 2 layers of cotton quilt batting and a layer of fleece interfacing then a layer of cotton fabric. I stapled it all to the back and now I have a surface for pressing I can keep right next to my cutting area, saving me steps to the ironing board and clearing up some floor space in my sewing room.

For more crafty goodness, visit Kris’ blog for ‘I can make that’ day!

I am thrilled to introduce our Day 7 guest poster, who happens to be a very dear blog friend of mine, do-it-yourselfer, from Pink and Polka Dot. We’ve been stalking each others’ blogs for well over a year and got to meet each other in real life last year at Blissdom. She is quite the crafty chick and has lots of fun tutorials on her blog—that I know you’ll want to try the all. She also shares beautiful decorating tips and has a crush on Edward from Twilight! And if you’ve never been to a blogging conference, there is nothing quite like that magical moment when two blogging friends spot each other from across the room and run and embrace and laugh like school girls. I’m making plans to attend Blissdom again in February, what about you? And now, prepare to be wowed by yet another marvelous crafty idea! She’s also doing some live craft shows so visit her blog for the dates/times.

Do you have a skirt in your closet that you no longer wear. Recycle it into an apron! I found this floral A-line skirt at a thrift store and thought it would make a cute apron. It is tres simple! I’ve attempted a tutorial below. Hope it makes sense. Have fun!

You could also add a pocket or a cute little ruffle at the bottom. I didn’t…yet. I just wanted to show you a simple recycle from skirt to apron. Can’t wait to see your’s.

Sing it with me, “On the fourth day of Christmas, my blog friend gave to me, 4 calling birds“, 3::coasters from Sandy, 2::garlands from Nester, and a dishmat made by Dar-by. My friend Denise has that song ‘playing’ on her blog and now you are lucky enough to get a tutorial of her famous birds. And you better act fast because I’m not sure she’s gonna give us unlimited access to her pdf pattern. Print, people, print.

I am fortunate to be friends {in real life—aka—IRL} with Denise and always enjoy the chance to chitty chat with her about a myriad of topics from theology to blogging to crafting. She actually is partially responsible for my new life; she introduced me to blogging and has been instrumental in mentoring me as a homeschooler. I’m so excited she’s agreed to show us her birds and even though I have one of the ‘real’ ones—made by her—-I think I’m gonna give this craft a try! Welcome Denise and thank you for teaching me so many wonderful things!

PAPER AND FABRIC BIRDS

I created my version of the little paper/fabric bird after seeing some out of my price range on Etsy. It took many tries–which you can read about here, but I think I finally *landed* on the perfect little decorating accessory.

Step 1: Pick out cute fabric and cut out pieces.
(Get a PDF of the pattern by contacting Denise)

Note: I would not attempt a paper bird first; but when you are ready, make your pattern out of something clear so that you can place it over the area of the map that you want to show. I used the plastic that was the window on some packaging. It is easier to see if you outline it with a permanent marker.

Note: I use quilter’s thread, small black beads, and old lady glasses for the next step. And in case you are wondering, in the above photo, LB stands for Little Bird. There are BB pieces as well. I used a small hole punch to make a template for the eye placement.

Step 2: Sew on the small beads for eyes

Step 3: Line up the small head piece for sewing first.

Step 4: Sew in the directions of the arrows on the pattern.
(Back of head to front of head to back of head to tail to beak to middle of belly.)
Clear as mud?

Note: I’m not sure I have ever sewn a bird the same way twice. Do what works best for you.

Step 5: Stuff bird.

Note: Use a pencil to get the stuffing in the tail. Poly-fil works fine for the fabric birds, but you will want to use a pulled apart cotton ball for the tail of a paper one. The Poly-fil will just keep sliding out and it will bug you.

Step 6: Sew shut.

Step 7: Make legs.

Note: I use 24-guage wire, but I think a large paper clip could also work–not a small paper clip because the legs would be too short. I know that because I tried it today when I couldn’t find my spool of wire. I use a jewelry tool, but needle-nosed pliers would probably work. I made the shape below out of a thicker wire to show the shape more clearly–actually, I made it because I couldn’t locate the missing spool of wire.

Step 7: Glue in legs.

Note: There are dots on the pattern to give you an idea of leg placement. Believe me, this is not an exact science. Getting the balance just right takes a bit of patience. I roll the ends of the wire in some tacky glue and then shove them through the holes that I make using a bigger needle–you know, stick it in and then just roll it around to make a bit of an opening in the fabric. I make sure the legs are about the same length and then allow the glue to dry. I then balance the fellow by holding down the feet and making slight adjustments to the angle of the legs. Sounds more complicated than it is.

Step 8: Give as a present and make people smile. See for yourself here.

More birds can be seen in this post.